{"id":10936,"date":"2026-07-08T19:29:24","date_gmt":"2026-07-08T11:29:24","guid":{"rendered":"https:\/\/www.yitingnw.com\/?page_id=10936"},"modified":"2026-07-08T19:31:02","modified_gmt":"2026-07-08T11:31:02","slug":"nonwoven-fabric-manufacturer","status":"publish","type":"page","link":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/","title":{"rendered":"Manufacturing Capabilities"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Your nonwoven fabric manufacturer for products that actually work in the real world<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Finding nonwoven material is easy. Getting that material to run stably on your production line, seal without breaking, filter without leaking, and ship consistently at scale \u2014 that is a different problem. Yi-Ting has been solving it since the 1990s.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

3 Reasons Buyers Bhoose Yi-Ting as Their Nonwoven Nonverter<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Material-to-product conversion\n<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

We bridge the gap between raw nonwoven and a finished product that performs. Sealing, lamination, slitting, forming \u2014 all in-house.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application-led structure design\n<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tWe design material structure around your end-use \u2014 flow rate, filtration clarity, heat tolerance \u2014 not just GSM and thickness on a spec sheet.\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Prototype to production, on one line<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tSame team, same facility \u2014 from first sample to 40,000-unit daily runs. No hand-off risk between development and manufacturing.\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Request a sample<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

For buyers who want to test before committing.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Send your spec<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tHave a target product? We respond within 24 hours.\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Ask a manufacturing question<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tNot sure where to start? We discuss your application first\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Yi-Ting Nonwoven Manufacturing: Capacity and Certifications<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t<\/span>\n\t\t\t\t0<\/span>\n\t\t\t\t+<\/span>\n\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tYears of OEM nonwoven converting experience\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t<\/span>\n\t\t\t\t0<\/span>\n\t\t\t\t<\/span>\n\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tConverting and finishing lines in operation\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t<\/span>\n\t\t\t\t0<\/span>\n\t\t\t\t pcs\/day<\/span>\n\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tV-drip coffee filter bags, single-shift capacity\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t<\/span>\n\t\t\t\t0<\/span>\n\t\t\t\t pcs\/day<\/span>\n\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tHeat-sealed tea bags, single-shift capacity\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
ISO 9001 & 13485<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tCertified for general and medical-grade manufacturing\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tOur in-house bacterial filtration efficiency (BFE) testing lab \u2014 equipped at the same specification as the Taiwan Textile Research Institute \u2014 runs validation testing on every mask and high-performance filtration batch we produce.\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Core Converting Capabilities<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tThe five areas where Yi-Ting’s process experience makes a measurable difference to finished product performance \u2014 and where most sourcing problems actually originate.\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

1. Composite lamination and structure engineering<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Most nonwoven products that underperform in the field have the wrong material structure \u2014 not the wrong material. Yi-Ting’s PN composite fabric is engineered by bonding two nonwoven layers with distinct fiber architectures, tuning the lamination to control three interdependent variables simultaneously: flow rate, filtration clarity, and oil retention.<\/p>

This matters for coffee and food filtration applications because those three variables trade off against each other. A structure optimised purely for flow rate will sacrifice clarity. One optimised for oil retention will restrict flow. Yi-Ting’s process history with the PN structure lets us navigate that tradeoff to a specified outcome \u2014 not just a closest available match.<\/p>

Competitors who supply single-layer fabric leave this engineering work to the buyer. We treat it as our responsibility.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

2. Heat sealing process control<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Seal integrity is the most common cause of in-use failure for nonwoven filter bags and pouches \u2014 burst seams during hot brewing, pinhole leaks under pressure, and sealing deformation from aggressive dwell-time settings.<\/p>

Yi-Ting calibrates seal temperature, pressure, and dwell time individually for each material combination \u2014 PP, PLA, PE, and composite blends all behave differently under the same nominal settings. A parameter set that works cleanly on one PLA supplier’s material will cause brittleness or delamination on another’s, even when the spec sheet looks identical.

This is accumulated process knowledge, not a machine feature. It reduces seal-related reject rates and prevents the batch-level failures that typically surface only after a buyer has moved to full-volume production.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

3. Food-contact nonwoven converting<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Converting nonwovens for direct food contact introduces requirements that most general converters are not equipped to manage: material compliance with FDA 21 CFR and EU food-contact regulations, consistent cleanliness through the converting process, and the absence of adhesives or finishing agents that are safe for industrial use but not for ingestion.<\/p>

Yi-Ting has been converting food-contact nonwovens for tea bag, coffee filter, and cooking pouch applications for over a decade. Our converting lines for food-contact products are maintained separately from industrial-grade lines, and incoming material is validated against food-contact compliance documentation before it enters the converting process.<\/p>

If your product requires FDA or EU food-contact certification documentation, we can supply the supporting paperwork.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

4. Custom nonwoven OEM: small orders to full production scale<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

A converter that handles only high-volume runs forces buyers to over-commit before a product is ready. One that handles only short runs can’t follow through to stable supply. Yi-Ting operates across both, by design.<\/p>

Development and sampling runs use the same converting equipment as production runs \u2014 not a separate prototyping setup. This means the seal parameters, tension settings, and material handling conditions validated during sampling carry over directly to production. The gap between ‘sample approved’ and ‘production matched’ is narrower because there is no process discontinuity between the two.<\/p>

In practice: we run coffee filter development quantities starting in the hundreds of units, and scale to 40,000 units per day on the same lines.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

5. End-use quality testing for nonwoven filtration products<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Standard QC for nonwovens tests material properties \u2014 GSM, tensile strength, thickness, seal integrity. Yi-Ting runs those checks, but they are not the final validation gate.<\/p>

For filtration products, we add use-simulation tests that replicate end-use conditions: flow rate measurement under controlled head pressure for coffee filter bags, boil-resistance testing for tea bags and cooking pouches, and powder retention checks across the full seal perimeter. These tests catch failure modes \u2014 channelling, pinhole seepage, structural collapse under heat \u2014 that pass standard material-property tests but fail in the buyer’s or their customer’s hands.<\/p>

For medical-grade nonwovens and mask components, bacterial filtration efficiency (BFE) testing is run on-site using equipment certified to the same standard as the Taiwan Textile Research Institute<\/a><\/span>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tThese five capabilities are not separate services \u2014 they run together through every project, from the first material proposal to final outgoing inspection. The next section describes how that process works in practice.\n\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Nonwoven OEM Development Process: From Inquiry to Production<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Most nonwoven sourcing problems don’t happen during manufacturing. They happen in the gap between what a buyer describes and what the converter actually builds \u2014 because no one clarified the end-use conditions, the machine compatibility, or which performance variables matter most.<\/p>

Yi-Ting’s development process is designed to close that gap early, so the first production batch behaves the way the sample did.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Step 1 \u2014 Application scoping<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Before any material is selected, we need to understand three things: what the product physically does in use, what processing equipment it runs on at the buyer’s end, and which performance variable matters most \u2014 flow rate, seal strength, filtration rating, heat tolerance, or something else.<\/p>

This conversation usually takes one or two exchanges. Buyers who arrive with a reference sample move through it faster. Buyers who arrive with a performance spec \u2014 ‘the bag needs to hold X grams of tea at a 100\u00b0C steep for five minutes without seam failure’ \u2014 move through it faster still.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
What this prevents<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Building a sample around the wrong variable and discovering it three iterations later.<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Step 2 \u2014 Material and structure proposal<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Based on the application scope, we propose a starting material or composite structure. For straightforward applications \u2014 a standard PP spunbond pouch for loose-leaf tea \u2014 this is a material selection from existing stock. For performance-sensitive applications \u2014 a coffee filter that needs to hold a specific flow rate window while retaining a defined level of oils \u2014 this involves proposing a composite structure, identifying the lamination parameters, and flagging any known tradeoffs upfront.<\/p>

We tell buyers what we expect to work, what we expect to be marginal, and why, before the first sample is made. That framing matters because it sets realistic expectations and makes the feedback round more useful.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
What this prevents<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Buyers receiving a sample with no context for evaluating it, leading to vague feedback and wasted iterations.<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Step 3 \u2014 Internal sampling and pre-shipment testing<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The first sample batch goes through internal testing before it reaches the buyer. For filtration products, this means flow rate measurement and powder retention checks. For sealed pouches and bags, it means seal strength testing and a simulated use check \u2014 boiling for tea bags, brew cycling for coffee filters. For medical-grade nonwovens, BFE testing is run on-site.<\/p>

We ship samples with a test data sheet available on request. Buyers who know what the numbers should be can evaluate the sample against spec immediately. Buyers who don’t yet have a target spec can use our data as a baseline for their own testing.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
What this prevents<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Buyers spending two weeks testing a sample that failed an obvious check we could have caught in house.<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Step 4 \u2014 Customer trial and structured feedback<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The buyer tests the sample under real conditions \u2014 on their filling line, with their packaging equipment, at their customer’s end, or in their own lab. The feedback we need covers four things: does it run on the equipment without jams or tension problems, does the seal hold under use conditions, does the filtration performance match the target, and does anything about the handling or appearance need to change.<\/p>

Feedback that covers all four points typically leads to a resolved second sample. Feedback that says only ‘it doesn’t work’ \u2014 without identifying which variable failed \u2014 leads to more rounds. We provide a short feedback template on request if it helps structure the conversation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
What this prevents<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Iterating on the wrong parameter because the failure mode wasn’t clearly identified.<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Step 5 \u2014 Process adjustment and re-sampling<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Adjustments are made to the material selection, composite structure, or process parameters \u2014 seal temperature, dwell time, lamination pressure, tension settings \u2014 based on the trial feedback. For most applications, this is where the critical work happens.<\/p>

A few things are worth stating plainly here. First, even when a re-sample uses nominally identical material from the same supplier, we re-validate the process parameters rather than assuming they carry over. Material properties vary between production lots; parameters that worked on lot A may need a small adjustment on lot B. Second, if a buyer’s feedback indicates the product is performing at the margin of what the proposed structure can deliver, we say so and propose an alternative structure rather than attempting incremental adjustments that won’t close the gap.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
What this prevents<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tReaching production with a product that was technically approved but was always one lot variation away from failure.<\/em>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Step 6 \u2014 Production validation and transfer<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Once a sample is approved, we document the validated process parameters \u2014 not just the product spec \u2014 before moving to production. Seal temperature, dwell time, tension settings, inspection criteria, and the specific material lot used for approval are all recorded. Production runs against those parameters, not against a general interpretation of the spec.<\/p>

First-production batches are run with the same checks as the approved sample. If anything deviates from the validated parameters \u2014 including incoming material that tests outside the tolerance window \u2014 production pauses for review rather than continuing and flagging issues after the fact.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
What this prevents<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The ‘sample-to-production gap’ \u2014 the common situation where an approved sample and the first production batch behave differently, with no documented reason why.<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

How many development iterations should you expect?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tThe honest answer depends on how clearly the application is defined at the start and how quickly feedback loops can be completed on the buyer’s side.\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\n\t\t\n\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/colgroup>\n\t\t\n\t\t\t\n\n\t\t\t\n\t\t\n\n\t\t\n\n\t\t
\n\t\t\t\t\tScenario<\/span>\n\n\t\t\t\t\t\t\n\t\t\t\t\t<\/span>\n\t\t\t\t<\/th>\n\n\t\t\t\n\t\t\t\t\tTypical iteration count and rationale<\/span>\n\n\t\t\t\t\t\t\n\t\t\t\t\t<\/span>\n\t\t\t\t<\/th>\n\n\t\t\t\t\t\t<\/tr>\n\t\t<\/thead>
\n\t\t\tEstablished application, known material<\/span>\n\n\t\t\t<\/span>\n\t\t<\/td>\n\t\t\t1\u20132 iterations. If you're sourcing a product type we've made before \u2014 standard PP tea bags, V-drip coffee filter bags \u2014 and your spec is within our existing process envelope, a single sample round is often sufficient. The main variable is whether your filling equipment has any unusual tension or temperature requirements.<\/span>\n\n\t\t\t<\/span>\n\t\t<\/td><\/tr>
\n\t\t\tCustom performance spec, defined application<\/span>\n\n\t\t\t<\/span>\n\t\t<\/td>\n\t\t\t2\u20134 iterations. If you have a target flow rate window, a specific seal strength requirement, or a filtration rating to hit, expect two to four rounds. The first sample establishes the baseline; subsequent rounds dial in the variables. Response time on the buyer's side is the main factor that determines total elapsed calendar time.<\/span>\n\n\t\t\t<\/span>\n\t\t<\/td><\/tr>
\n\t\t\tNew application or novel composite structure<\/span>\n\n\t\t\t<\/span>\n\t\t<\/td>\n\t\t\t3\u20136+ iterations. If the application is genuinely new to us \u2014 a material combination we haven't run, a performance requirement at the edge of what current structures can deliver \u2014 we say so upfront and plan accordingly. These projects take longer, but they also produce the most defensible results because the process is fully characterised by the time production starts.<\/span>\n\n\t\t\t<\/span>\n\t\t<\/td><\/tr>\n\t\t\t<\/tbody>\n\t\t<\/table>\n\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tThe development process described above is not a sales sequence \u2014 it is the same sequence we use internally to manage every new product introduction. The QC system in the next section operates as a continuation of it: the validated parameters from development become the inspection criteria for production.\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Nonwoven Quality Control: ISO 9001 & ISO 13485 Inspection Process<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Yi-Ting operates under ISO 9001:2015 and ISO 13485:2016. The four-stage inspection sequence below describes how those standards translate into actual checks on the shop floor \u2014 what is tested, at what point, and why each stage exists.

A quality system is only as useful as the failure modes it catches. Each stage below notes the specific defect class it is designed to intercept before it reaches the next stage.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Stage 1<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Incoming material inspection<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Checks performed<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2014 Basis weight (GSM), verified by gravimetric measurement against the purchase spec tolerance<\/p>

\u2014 Thickness, measured at multiple points across the roll width to detect edge-to-centre variation<\/p>

\u2014 Visual inspection for contamination, fibre clumping, holes, and surface irregularities<\/p>

\u2014 Seal-response check for heat-sealable materials: a test seal is run at the validated parameters to confirm the material behaves as expected before it enters a production run<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Why this stage exists<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Material that passes a supplier’s outgoing inspection can still arrive outside tolerance \u2014 lot-to-lot variation is normal in nonwoven production. The seal-response check is particularly important: two rolls with identical GSM and thickness can have meaningfully different heat-sealing behaviour depending on their fibre orientation, resin content, and processing history. Catching that variation at incoming prevents it from expressing as seal failures mid-run.<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Stage 2<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

First article inspection<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Checks performed<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2014 Dimensional verification: length, width, and gusset dimensions against drawing tolerance<\/p>

\u2014 Seal integrity: visual and tactile check of all seam lines for complete fusion, even bead, and absence of burn-through or cold spots<\/p>

\u2014 Structural check: for composite products such as the PN laminate, bonding uniformity and layer adhesion are verified before full production continues<\/p>

\u2014 Appearance: fibre coverage, surface uniformity, and any print or labelling alignment where applicable

\u2014 For OEM jobs where the buyer has approved a reference sample, the first article is compared directly against that reference. Photographic records of the first article are retained and available on request.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Why this stage exists<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Setup conditions \u2014 particularly seal temperature after a line changeover and material tension after a roll splice \u2014 are the most common source of early-run defects. First article inspection catches setup errors before they propagate through the batch. A run that begins producing correctly is far more likely to complete correctly.<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Stage 3<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

In-process inspection<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Checks performed<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2014 Seal strength: periodic pull tests on sealed seams to verify seal integrity has not drifted as the line warms or as material properties vary across the roll<\/p>

\u2014 Dimensional stability: spot checks on dimensions to detect any creep in cutting or forming positions<\/p>

\u2014 Material alignment and registration: for multi-layer products, layer alignment is checked to ensure the composite structure is forming within spec<\/p>

\u2014 Visual defects: ongoing checks for surface contamination, fibre pull-through, and forming anomalies

\u2014 Any check that falls outside the control limits triggers a line stop. The run is not resumed until the out-of-spec condition is identified, corrected, and verified by a passing check before restart.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Why this stage exists<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Production lines are not static systems. Seal temperature drifts as heating elements cycle. Material tension changes as roll diameter decreases. In-process inspection converts a reactive process (find defects at final inspection) into a proactive one (detect drift before defects are produced).<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Stage 4<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Final inspection and outgoing release<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Checks performed<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2014 Full dimensional check against the approved drawing
\u2014 Seal integrity: pull test to a defined minimum force on a sample set drawn from across the batch<\/p>

\u2014 Count and packaging verification against the purchase order and any customer-specified labelling requirements<\/p>

\u2014 Coffee filter bags: flow rate measurement under controlled head pressure; powder retention check across the full seal perimeter<\/p>

\u2014 Tea bags and cooking pouches: boil test at 100\u00b0C for the specified steep duration; structural integrity check after the boil cycle<\/p>

\u2014 Medical-grade nonwovens and mask components: BFE (Bacterial Filtration Efficiency) testing per ASTM F2101, conducted on the in-house tester

\u2014 Test records for each batch are retained. Buyers who require a certificate of conformance or batch test report should specify this at order placement; documentation is available on request.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Why this stage exists<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

In-process inspection reduces but does not eliminate the possibility of a batch containing out-of-spec units. Final inspection on a statistically drawn sample provides the last verification gate before shipment. Use-simulation tests at final inspection catch failure modes that pass material-property checks but fail in the field \u2014 channelling, pinhole seepage, structural collapse under heat.<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Bacterial filtration efficiency (BFE) testing \u2014 in-house lab<\/strong><\/p>

Yi-Ting’s in-house BFE tester operates to the same instrument specification as the Taiwan Textile Research Institute (TTRI) \u2014 the national standards body for textile testing in Taiwan. The tester runs ASTM F2101 and BS EN 14683 protocols.<\/em><\/p>

We invested in it during the period of high demand for medical-grade mask materials because sending samples to an external lab introduced a multi-day delay into every quality hold decision. Having the capability in-house means a filtration performance question that would otherwise take three days to resolve can be answered within hours.<\/em><\/p>

Uses: BFE validation on incoming meltblown filter layers | Outgoing quality verification on medical mask component batches | Performance verification when a buyer requests confirmation of filtration grade before shipment.<\/em>

Third-party lab testing through an accredited external facility remains available where buyers require an independent test certificate.<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The inspection sequence above reflects what ISO 9001 and ISO 13485 require, translated into the specific defect modes that matter for nonwoven filter bags, medical components, and food-contact pouches.

If you have questions about how a specific product type is handled within this system, the FAQ below covers the most common ones \u2014 or you can ask directly<\/a><\/span>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

Your nonwoven fabric manufacturer for products that actually work in the real world Finding nonwoven material is easy. Getting that material to run stably on your production line, seal without breaking, filter without leaking, and ship consistently at scale \u2014 that is a different problem. Yi-Ting has been solving it since the 1990s. 3 Reasons …<\/p>\n

Manufacturing Capabilities<\/span> Read More \u00bb<\/a><\/p>\n","protected":false},"author":5,"featured_media":10077,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"inline_featured_image":false,"site-sidebar-layout":"no-sidebar","site-content-layout":"page-builder","ast-global-header-display":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"disabled","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"enabled","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","_ayudawp_aiss_exclude":false,"footnotes":""},"class_list":["post-10936","page","type-page","status-publish","has-post-thumbnail","hentry"],"acf":[],"yoast_head":"\nNonwoven Fabric Manufacturer & Converter | Yi-Ting Taiwan<\/title>\n<meta name=\"description\" content=\"Yi-Ting is a Taiwan-based nonwoven fabric manufacturer and converter specialising in food-grade filtration, coffee filters, tea bags, and medical nonwovens. 30+ years OEM experience. Sample in weeks.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Nonwoven Fabric Manufacturer & Converter | Yi-Ting Taiwan\" \/>\n<meta property=\"og:description\" content=\"Yi-Ting is a Taiwan-based nonwoven fabric manufacturer and converter specialising in food-grade filtration, coffee filters, tea bags, and medical nonwovens. 30+ years OEM experience. Sample in weeks.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/\" \/>\n<meta property=\"og:site_name\" content=\"Yi-Ting| Taiwanese professional Nonwoven Fabric manufacturer\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/YiTingofficial\/\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-08T11:31:02+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.yitingnw.com\/wp-content\/uploads\/2025\/12\/banner.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1920\" \/>\n\t<meta property=\"og:image:height\" content=\"960\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"17 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/nonwoven-fabric-manufacturer\\\/\",\"url\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/nonwoven-fabric-manufacturer\\\/\",\"name\":\"Nonwoven Fabric Manufacturer & Converter | Yi-Ting Taiwan\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/nonwoven-fabric-manufacturer\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/nonwoven-fabric-manufacturer\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.yitingnw.com\\\/wp-content\\\/uploads\\\/2025\\\/12\\\/banner.jpg\",\"datePublished\":\"2026-07-08T11:29:24+00:00\",\"dateModified\":\"2026-07-08T11:31:02+00:00\",\"description\":\"Yi-Ting is a Taiwan-based nonwoven fabric manufacturer and converter specialising in food-grade filtration, coffee filters, tea bags, and medical nonwovens. 30+ years OEM experience. Sample in weeks.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/nonwoven-fabric-manufacturer\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/nonwoven-fabric-manufacturer\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/nonwoven-fabric-manufacturer\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.yitingnw.com\\\/wp-content\\\/uploads\\\/2025\\\/12\\\/banner.jpg\",\"contentUrl\":\"https:\\\/\\\/www.yitingnw.com\\\/wp-content\\\/uploads\\\/2025\\\/12\\\/banner.jpg\",\"width\":1920,\"height\":960},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/nonwoven-fabric-manufacturer\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"home\",\"item\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Manufacturing Capabilities\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/\",\"name\":\"Yi-Ting| Taiwanese professional Nonwoven Fabric manufacturer\",\"description\":\"Yi-Ting is a professional nonwovens fabric manufacturer in Taiwan, It has strong OEM capabilities, Whether you need coffee filters, masks, etc., we can tailor them for you.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/#organization\"},\"alternateName\":\"Yi-Ting| Nonwoven Fabric | Coffee filter\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/#organization\",\"name\":\"YITING Nonwoven \u2013 Nonwoven Fabric Manufacturer\",\"alternateName\":\"YITING\",\"url\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.yitingnw.com\\\/wp-content\\\/uploads\\\/2023\\\/01\\\/cropped-web-logo-2.png\",\"contentUrl\":\"https:\\\/\\\/www.yitingnw.com\\\/wp-content\\\/uploads\\\/2023\\\/01\\\/cropped-web-logo-2.png\",\"width\":512,\"height\":512,\"caption\":\"YITING Nonwoven \u2013 Nonwoven Fabric Manufacturer\"},\"image\":{\"@id\":\"https:\\\/\\\/www.yitingnw.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/YiTingofficial\\\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Nonwoven Fabric Manufacturer & Converter | Yi-Ting Taiwan","description":"Yi-Ting is a Taiwan-based nonwoven fabric manufacturer and converter specialising in food-grade filtration, coffee filters, tea bags, and medical nonwovens. 30+ years OEM experience. Sample in weeks.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/","og_locale":"en_US","og_type":"article","og_title":"Nonwoven Fabric Manufacturer & Converter | Yi-Ting Taiwan","og_description":"Yi-Ting is a Taiwan-based nonwoven fabric manufacturer and converter specialising in food-grade filtration, coffee filters, tea bags, and medical nonwovens. 30+ years OEM experience. Sample in weeks.","og_url":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/","og_site_name":"Yi-Ting| Taiwanese professional Nonwoven Fabric manufacturer","article_publisher":"https:\/\/www.facebook.com\/YiTingofficial\/","article_modified_time":"2026-07-08T11:31:02+00:00","og_image":[{"width":1920,"height":960,"url":"https:\/\/www.yitingnw.com\/wp-content\/uploads\/2025\/12\/banner.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"17 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/","url":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/","name":"Nonwoven Fabric Manufacturer & Converter | Yi-Ting Taiwan","isPartOf":{"@id":"https:\/\/www.yitingnw.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/#primaryimage"},"image":{"@id":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/#primaryimage"},"thumbnailUrl":"https:\/\/www.yitingnw.com\/wp-content\/uploads\/2025\/12\/banner.jpg","datePublished":"2026-07-08T11:29:24+00:00","dateModified":"2026-07-08T11:31:02+00:00","description":"Yi-Ting is a Taiwan-based nonwoven fabric manufacturer and converter specialising in food-grade filtration, coffee filters, tea bags, and medical nonwovens. 30+ years OEM experience. Sample in weeks.","breadcrumb":{"@id":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/#primaryimage","url":"https:\/\/www.yitingnw.com\/wp-content\/uploads\/2025\/12\/banner.jpg","contentUrl":"https:\/\/www.yitingnw.com\/wp-content\/uploads\/2025\/12\/banner.jpg","width":1920,"height":960},{"@type":"BreadcrumbList","@id":"https:\/\/www.yitingnw.com\/en\/nonwoven-fabric-manufacturer\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"home","item":"https:\/\/www.yitingnw.com\/en\/"},{"@type":"ListItem","position":2,"name":"Manufacturing Capabilities"}]},{"@type":"WebSite","@id":"https:\/\/www.yitingnw.com\/en\/#website","url":"https:\/\/www.yitingnw.com\/en\/","name":"Yi-Ting| Taiwanese professional Nonwoven Fabric manufacturer","description":"Yi-Ting is a professional nonwovens fabric manufacturer in Taiwan, It has strong OEM capabilities, Whether you need coffee filters, masks, etc., we can tailor them for you.","publisher":{"@id":"https:\/\/www.yitingnw.com\/en\/#organization"},"alternateName":"Yi-Ting| Nonwoven Fabric | Coffee filter","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.yitingnw.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.yitingnw.com\/en\/#organization","name":"YITING Nonwoven \u2013 Nonwoven Fabric Manufacturer","alternateName":"YITING","url":"https:\/\/www.yitingnw.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.yitingnw.com\/en\/#\/schema\/logo\/image\/","url":"https:\/\/www.yitingnw.com\/wp-content\/uploads\/2023\/01\/cropped-web-logo-2.png","contentUrl":"https:\/\/www.yitingnw.com\/wp-content\/uploads\/2023\/01\/cropped-web-logo-2.png","width":512,"height":512,"caption":"YITING Nonwoven \u2013 Nonwoven Fabric Manufacturer"},"image":{"@id":"https:\/\/www.yitingnw.com\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/YiTingofficial\/"]}]}},"_links":{"self":[{"href":"https:\/\/www.yitingnw.com\/en\/wp-json\/wp\/v2\/pages\/10936","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.yitingnw.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.yitingnw.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.yitingnw.com\/en\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/www.yitingnw.com\/en\/wp-json\/wp\/v2\/comments?post=10936"}],"version-history":[{"count":45,"href":"https:\/\/www.yitingnw.com\/en\/wp-json\/wp\/v2\/pages\/10936\/revisions"}],"predecessor-version":[{"id":11061,"href":"https:\/\/www.yitingnw.com\/en\/wp-json\/wp\/v2\/pages\/10936\/revisions\/11061"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.yitingnw.com\/en\/wp-json\/wp\/v2\/media\/10077"}],"wp:attachment":[{"href":"https:\/\/www.yitingnw.com\/en\/wp-json\/wp\/v2\/media?parent=10936"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}